Impulse 6000D/7000DP Plug-In

The Ansur Impulse 6000D/7000DP Plug-In is an add-on module for the Ansur Test Automation software application. The plug-in is used in conjunction with the Impulse 6000D/7000DP Defibrillator Analyzer to provide test automation capabilities using the Ansur PC software.

 

 

NOTE: Requires Ansur Executive v3.1.1 or newer

Introduction

This ReadMe file outlines changes to each subsequent version of Ansur Impulse 6000D/7000DP Plug-In relative to the previous released version.

 

USB Driver and Cable Requirements

USB installation for Impulse 6000D/7000DP is installed automatically with Ansur executive 2.5.0 and higher.

 

Use a standard USB printer cable to connect the Impulse 7000 to your PC.

History

This chapter describes the changes made between each new released version.

Release 1.2.5

        Fix for the template settings not retained when loading file from older plug-in

Release 1.2.4

        Fix for the VFIB2 waveform in the Supraventricular type

        Translate legacy 'VFib' <ECGType> value to 'VFib1

Release 1.2.3

  • Index values changed for the VFIB2 Coarse and VFIB2 Fine for the Arrhythmia Ventricular selection.. Retained the value of the Asystole to support older Ansur files.

Release 1.2.2

  • Added support for VFIB2 commands for Energy Measurement, Charge Time, Sync Time tests

Release 1.2.1

  • Support for the new Ansur Executive 3.1.1.

Release 1.1.5

  • Bug fix: Display of MTI data of all instruments in the print report.
  • Bug fix: To open the MTT & MTR file in French language, modified the XML tags while saving MTT & MTR file.

Release 1.1.4

  • Defib Pulse Repition test changed for Norwegian language setting.

Release 1.1.3

  • Implemented the External Load Selection.

Release 1.1.2

  • Dynamic graph scaling is implemented in the waveform.

Release 1.1.1

  • The graph scaling is modified for the FW version greater than v1.02

Release 1.1.0

  • Implemented the display of Serial Number, Firmware version and Equipment of the instrument in print report.
  • Implemented Norwegian language settings for communication error of waveform tests and opening/saving templates.

Release 1.0.0

  • V1.0.0 is the first release of the Impulse 6000D/7000DP plug-in.

 

Language Changes

This chapter describes the changes made to the language file in each new version.
The list includes only versions where the language file was changed.

Release 1.0.0

  • Initial revision.

 

Fluke Biomedical

6045 Cochran Road

Cleveland, OH 44139-3303 U.S.A.

 

Fluke Biomedical Europe

Science Park Eindhoven 5110

5692EC Son, The Netherlands

 

For more information, contact us:
U.S.A. (800) 850-4608 or

Fax (440) 349-2307

Europe/M-East/Africa +31 40 267 5435 or

Fax +31 40 267 5436

Other countries +1 (440) 248-9300 or

Fax +1 (440) 349-2307

Email: sales@flukebiomedical.com

Web access: www.flukebiomedical.com

 

2014 Fluke Corporation. All rights reserved.