Plug-In Read Me

Ansur Plug-In is a product facilitating automatic test and inspection with the use of the ProSim 6/8 or units for testing patient simulators.

 

 

Introduction

This read me file outlines changes to each subsequent version of Ansur ProSim 6/8 Plug-In relative to the previous released version.

 

History

This chapter describes the changes made between each new released version.

Release 1.0.3

  1. Fixed IBP Static Pressure issue.
  2. Provided ‘Disconnect’ button for Mini Plug-In.
  3. Proper alignments and consistent naming throughout the tabs in Mini Plug-In.
  4. Implemented Print test results depending on Operator IDs and Test IDs.
  5. Fixed the issue of the uploading proper value of Amplitude during Autosequence upload.
  6. Implemented ‘Envelop Shift’ for ‘NIBP Dynamic Simulation’ test.
  7. Implemented ‘Zero Pressure’ functionality from the Ansur TestGuide toolbar for ‘NIBP Manometer’ test.

Release 1.0.2

  1. Renamed ‘Medical Training’ to ‘ECG Testing’.
  2. Changed the limits for ECG Simulation Tests.
  3. Renamed ‘SpO2 Simulation Test’ to ‘SpO2 Test’.
  4. Renamed ‘Perfusion’ to ‘Pulse Amplitude’ for SpO2 Test.

Release 1.0.1

  1. Included ProSim 8 Mini Plug-In in ProSim 6/8 Plug-In installation set.
  2. Implemented Split and Combined preview option in ProSim 8 Mini Plug-In Print preview.
  3. Provided option to delete custom R-Curves in ProSim 8 Mini Plug-In.

Release 1.0.0

  1. Initial version of the ProSim 6/8 Plug-In. 

 

Fluke Biomedical

6045 Cochran Road

Cleveland, OH 44139-3303 U.S.A.       

 

Fluke Biomedical Europe

Science Park Eindhoven 5110

5692EC Son, The Netherlands

 

For more information, contact us:
U.S.A. (800) 850-4608 or

Fax (440) 349-2307

Europe/M-East/Africa +31 40 267 5435 or

Fax +31 40 267 5436

Other countries +1 (440) 248-9300 or

Fax +1 (440) 349-2307

Email: sales@flukebiomedical.com   

Web access: www.flukebiomedical.com

 

© 2011 Fluke Corporation. All rights reserved.